TEGARA CAT40 ER16 Collet Chuck Tool Holder 2.5" MADE IN TAIWAN NEW P[

TEGARA CAT40 ER16 Collet Chuck Tool Holder 2.5

$49.95 Buy It Now or Best Offer
free,30-Day Returns

Seller Store discount_machine
(264149) 99.9%,

Location: Saint Charles, Illinois
Ships to: US,
Item: 304517749807

Restocking Fee:No
Return shipping will be paid by:Buyer
All returns accepted:Returns Accepted
Item must be returned within:30 Days
Refund will be given as:Money back or replacement (buyer’s choice)
Return policy details:
MPN:202-1450G
Shars Tool:Shars Tool
California Prop 65 Warning:WARNING: This product can expose you to chemicals including nickel, which are known to the State of California to cause cancer and birth defects or other reproductive harm.

TEGARA CAT40 ER16 Collet Chuck Tool Holder 2.5″ MADE IN TAIWAN NEW Quality Guarantee Product Code 202-1450G Product description SKU 202-1450G TOOL HOLDER CATEGORY Collet Chuck SHANK SIZE CAT40 PROJECTION LENGTH 2.5 MAX RPM BALANCED TO G2.5 20000 TIR (INCH) 0.0001 DRAWBAR THREAD SIZE 5/8x11UNC stop screw thread size M11x1.0 dual contact tool holder No COLLET series ER16 COLLET chuck style Standard COLLET nut diameter 1.102 Product application Dynamically balanced to 20,000RPM at G2.5 by Haimer balancing machine at all location for consistent balanceUnique design feature in the extension nose to minimize the off-balance nature of CAT 40 taper specification. On the side of flange where a half spherical hole is located, a flat is cut into the cylinder nose to compensate the weight of the metal chips lost from forming this spherical hole. This design allows the left side and right side of the holder to achieve 50-50 perfect weight distribution in its upright position, like the position inside a machine spindle. Symmetrical design in evenly weight distribution will minimize centrifugal force in high speed spinning and thus maximize the holder’s ability to hold the cutting tool concentric to spindle rotation.In a generic standard ER collet nut, an internal ring is off-centered so that an ER collet can be easily snapped into it and holds the ER collet in place. To minimize this off-centering, SHARS ER collet nut is optimized to distribute the flat sides’ area to off-set the off-center. ER Collet Nut is also balanced to 20,000 RPMManufactured from alloy steel with good core strength and long wear life. Taper shank is case hardened to 56-60 HRC and has a core hardness of 35-40 HRC. The case hardness is designed to give maximum wear life without compromising the 60-62 HRC spindle. The core creates a damping effect from the vibration during the high speed milling, especially in long reach or heavy duty milling application Taper ground to AT3 or better accuracy standard for maximum contact with spindle. All of SHARS CAT/BT/HSK tool holder use Stotz Air/Electronic Gaging for production and finish inspection. Stotz has been chosen by major aircraft companies as the best and most consistent gaging for tool holder shanks All critical surface are precision groundConcentricity is less than 0.0001″ from taper to end mill pocketEach holder comes with a lab certificate on its taper accuracy and runout measurementInternal set screw is included and can be used as a stopping pin to prevent end mill or drill from sliding backwards while performing heavy cuttingCoolant through capability by removing the internal set screw Collet nut thread is precision ground –> Dynamic Balancing Tool holder is balanced to G2.5 20,000 RPM on a HAIMER Tool Dynamic Balancing System from Germany. Balanced tool holder minimizes the centrifugal forces which minimize the stress on spindle bearing, minimize vibration and maximize the cutting tool’s life cycle and greatly improve surface finish. Pre-Balance Design Unique design feature in the flange to minimize the off-balance nature of CAT 40 taper specification. On the shoulder under the flange, a side is mill flat to compensate the weight of the metal chips lost from forming the spherical hole in the flange. This design allows the left side and right side of the holder to achieve 50-50 perfect weight distribution in its upright position, like the position inside a machine spindle. Symmetrical design in evenly weight distribution will minimize centrifugal force in high speed spinning and thus maximize the holder’s ability to hold the cutting tool concentric to spindle rotation. Mirror Finish To achieve AT3 or better taper contact as an industry standard, our taper surface are precision ground on Shigiya CNC grinder from Japan. We are not satisfied with just meeting the industry standard, the surface roughness on the taper is maintained to mirror finish. High Torque Collet Nut The maximum torque is laser marked on the ER collet nut face to take the guess game out of the way to ensure proper amount of force should be applied while tightening. Innovative coating process significantly increases the clamping force by 75% compared to standard ER collet nut. More gripping force provides better rigidity and reduces the possibility of losing grip on the round shank which lead to expensive damage on cutting tools and work piece material. Asymmetrical O-Ring Internal clamping ring’s shape is design to minimize out-of-balance compare to the standard off-center o-ring design from other standard ER collet nut, achieving 12,000 RPM without needed to drill holes on the collet nut body when placed on a dynamic balanced machine to preserve ER collet nut’s body strength. Tool Holder Cutting Demo Watch a quick demo on Tegara tool holder in action to go through the aluminum block like butter. The USA-Made end mills with high helix angle are designed for aluminum to increase feed rate and leaves a good surface finished. The workpiece is clamped in the Tegara 690X vise and machined in a Haas VF7 mill 40 taper. We have other holders & collet chucks available at My Ebay Store: SHIPPING: UPS Ground Buyer pays ACTUAL UPS shipping & insurance, and a $3.00 handling fee for this item to be shipped to all states within the continental United States. Hawaii, Alaska & and other United States Territories will ship via UPS BLUE. Canada will pay actual shipping costs plus duty fees via UPS. We can combine other auctions or store items to save on shipping. You may ask for freight cost before buying tools. Shipment will be made the same day as your payment is received and an UPS tracking number will be email to you. If your order is being shipped to an address outside of the United States, local consumer tax and/or customs duty , brokerage charges may apply and the package’s recipient may need to pay these to clear customs. PAYMENT: We accept : VISA, MasterCard and E-Check on PayPal.com Illinois residents add 8% sales tax. RETURNS: If the item stated as brand new is found defective on arrival or incorrect item was shipped, buyer understands that the product will be repaired or replaced at seller’s discretion, and be given a reasonable amount of time. Buyer is responsible for return shipping costs and insurance. Warranties are offered by the manufacturer and will be honored by the manufacturer. All shipping and handling fees will not be returned in any case.

Frequently Asked Questions About TEGARA CAT40 ER16 Collet Chuck Tool Holder 2.5″ MADE IN TAIWAN NEW P[ in My Website

joharjisa.com is the best online shopping platform where you can buy TEGARA CAT40 ER16 Collet Chuck Tool Holder 2.5″ MADE IN TAIWAN NEW P[ from renowned brand(s). joharjisa.com delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.

What are the best-selling TEGARA CAT40 ER16 Collet Chuck Tool Holder 2.5″ MADE IN TAIWAN NEW P[ on joharjisa.com?